MECHANICAL DIMENSIONS:
| Frequency Range (MHz) | 40 MHz to 160 MHz | |
| Higher Frequency Available | 180, 200, 220 MHz | |
| Frequency Stability (ppm) | +/-100ppm | |
| - | Inclusive of calibration tolerance at 25C, operating temperature range, voltage, load change, aging, shock and vibration | |
| Temperature Range (C) | - | |
| Operating | 0C to 70C | |
| Storage | -55C to 125C | |
| Supply Voltage (VDC) | - | |
| ECL (VEE) | -5.2 +/-5% | |
| PECL (Vcc) | +5.0 +/-5% | |
| Ground (Vss) | - | |
| Supply Current (mA) | - | |
| Typical | 28; 55 on R-Suffix (Option 3) | |
| Maximum | 60; 90 on R-Suffix (Option 3) | |
| ECL Output | Refer to Appendix C, Table 4. | |
| Test Circuit Diagram | Refer to Appendix C, Figure 6. | |
| PIN | K1149AA | K1149AB | K1149AC | K1149AM | K1149BA | K1149BC | K1149BM | K1149CA |
| 1 | Case GND | Case GND | NC | NC | Comp Out | Comp Out | Comp Out | NC |
| 7 | VEE | Vss | VEE | Vss & Case GND | Vss & Case GND | VEE | Vss & Case GND | VEE & Case GND |
| 8 | ECL Out | ECL Out | ECL Out | ECL Out | PECL Out | ECL Out | ECL Out | PECL Out |
| 14 | Vss | VEE | Vss & Case GND | VEE | Vcc | Vss & Case GND | VEE | Vcc |
| Freq | 40 to 125 MHz | 40 to 160 MHz | ||||||
| Option | 1, 2, 3 | 2, 3 | ||||||
Options Available:
Opt 1: Optional +5.0V +/-10% operartion at Vss
Opt 2: +/-50ppm (K1149XX5) available only in the frequency range of 40 MHz to 160 MHz
Opt 3: Optional internal pull down resistor available only in the range of 40 MHz to 160 MHz-(K1149XX-R)
Note: Available frequencies above 160 MHz are 200 MHz and 220 MHz. Consult factory for additional frequencies
